Industrial Air Integrity
Positive-pressure ventilation manifolds and automated air quality monitors prevent micro-particulate infiltration in heavy manufacturing facilities, maintaining strict environmental biosecurity parameters.
Deployed in a pharmaceutical cleanroom, the Z-Series reduced particulate counts below ISO Class 5 thresholds within 72 hours of installation. The automated pressure sensors flagged a pre-filter clog before production loss occurred.
Retrofitted into a semiconductor fab's ceiling penetration, the HSS-900 achieved a leakage rate of 0.008% at 50 Pa. The self-diagnostic cycle confirmed seal integrity every 24 hours, eliminating manual inspection downtime.
Installed across a heavy manufacturing floor, the AQM-400 detected a TVOC spike from a solvent leak within 30 seconds. The monitor triggered an HVAC adjustment that contained the contamination to a single zone.
Combined the Z-Series and AQM-400 into a closed-loop system for a biosecure containment facility. The manifold maintained 15 Pa positive pressure differential, and the monitor automatically adjusted fan speed to compensate for door openings.
Our engineered systems reduce particulate infiltration and maintain biosecurity parameters in heavy manufacturing environments. Each module is built for integration with existing ventilation and monitoring infrastructure.
Request a technical consultation01
Multi-stage HEPA H14 filtration with real-time differential pressure monitoring. Scales from 500 to 5000 CFM per module for cleanrooms and production lines.
02
Dual-gasket pneumatic compression achieving leakage rates below 0.01% at 50 Pa. Integrates via Modbus RTU with self-diagnostic seal integrity checks every 24 hours.
03
Networked sensor array tracking PM1, PM2.5, PM10, TVOC, CO2, temperature, and humidity every 10 seconds. Configurable alarms trigger HVAC or containment adjustments.
04
Engineered manifolds maintain positive pressure differentials across containment zones. Designed for direct integration with Z-Series filtration and AQM-400 monitoring.
Filtration arrays, sealing hardware, and operational guides for heavy manufacturing environments.
Multi-stage HEPA filtration with real-time pressure monitoring for ISO Class 5 environments. Supports 500 to 5000 CFM.
View array specsDual-gasket compression with pneumatic actuators. Leakage below 0.01% at 50 Pa. Integrates via Modbus RTU.
Seal system detailsReal-time PM, TVOC, CO2, temperature, and humidity tracking. Configurable alarms and cloud dashboard.
Monitor capabilitiesSpecific considerations for scaling positive-pressure ventilation in existing production floors.
Read planning notesField decisions during the initial deployment of automated air quality monitors in a steel fabrication plant.
First week reviewFollow-up adjustments to hermetic seal maintenance intervals based on real particulate load data.
Review outcomes